Airnesco is a group of companies formed in 1948 that specialises in the design and manufacture of a complete range of unique compressed air operated products to cover most tube and plant cleaning applications. An addition to the group in 2001 introduced the design and manufacture of specialist tooling for the window industry.
The Airnesco range of products falls into these four main categories :
Industrial Tube Cleaning
The Industrial Tube Cleaning product range has been in production for more than 50 years and provides high quality, air operated, inexpensive cleaning solutions for most tube cleaning applications.
Aluminium Window Tooling
Our Aluminium Window Tooling provides specialist tooling for the Aluminium Window Industry.
Military Barrel Cleaning
The Bore Cleaning system cleans all types of smooth, rifled, chromed and steel barrels and has been supplied globally.
Vacuum Cleaners
We have been providing the Vacuum Cleaner Range for over 20 years.
Available for domestic, commercial or industrial use they can be 3 Phase, Single Phase, Air or Battery Operated.
The Vacuum Cleaners will clean wet or dry and units are available for hazardous areas.
Other makes of vacuum cleaners are available and we will be happy to source you exactly what you require.
Our after sales service is second to none with same or next day vacuum repairs and testing, a large stock of spares and accessories held on site and competitive pricing.
Military Barrel Cleaning
The Bore Cleaning System cleans all types of smooth, rifled, chromed and steel barrels and has been supplied globally. The barrel cleaning system can be supplied to clean barrels from 25mm up to 203mm and a wide variety of steel and nylon brushes are available to suit.
The system can boast one-man, maintenance free, speedy operation and can be transported anywhere in its sturdy container.
Bofors have been using the system for some years when demonstrating their barrels and for use in the workshops along with Qinetic for testing and BAE Systems.
Otomelara have approved the system for use on their barrels and we are in the process of achieving the same accreditation from other gun barrel manufacturers.
The system can be used with a cleaning fluid if required and a heavy duty system for removing tough deposits is available in all sizes. The Gun Barrel Cleaning System is competitively priced and complements the AGI Gun Barrel Bore Gauge and the AGICAM (Gun Barrel Visual Inspection System) to give a complete Gun Barrel Maintenance Solution.
Industrial Tube Cleaning
The Industrial Tube Cleaning product range has been in production for more than 50 years and provides high quality, air operated, inexpensive cleaning solutions for most tube cleaning applications.
The Ferret uses an exclusive two-way vibratory action to propel the brush through the tube without the need for manual pulling or pushing. At the end of the tube the action is reversed automatically and the brush returns to the operator. The Ferret can be used in Vertical or Horizontal Shell Boilers, Fire Tubes, Waste Heaters and all tubes that have deposits. A vacuum attachment or Y-Piece can be added to the Ferret and attached to a vacuum to aid the extraction of the deposits.
The Percussion Lance is powerful, fast and highly efficient. It cleans combustion deposits from economic, waste-heat and water-tube boilers, economizers and condensers without brushes. The Percussion Lance can also be used for Gas Turbines, Castings, Cylinder Blocks, Blast Furnaces, Cupulas, Shipping, Tar Distillers, Gilled Economisers and Paper Mills or any application that needs a powerful burst of air to clean or clear.
The Air Water Gun cleans condenser tubes with just air and water or the use of bullets. It can also be used for Water Tube Boilers, Air Heaters and Superheaters.
The Bunker Lance is a lightweight percussion lance used for the safe clearing of choked or blocked Coal Bunkers and Feed Hoppers. The Bunker Lance will unchoke any material including iron ore, coal, feed stuffs, etc…
The Snuffer Lance is especially designed for the oil industry to rapidly extinguish small fires. It can also be used for Chemical Clearing, Sterilisation and Vehicle and Plant Cleaning.
A wide range of Brushes and Bullets are available, usually from stock.
Aluminium Window Tooling
Our Aluminium Window Tooling provides specialist tooling for the Aluminium Window Industry.
The Cleat Cutting Service uses customer supplied cleat bar and is fast, accurate and cost efficient and uses our fully automatic cutting equipment. All cleats are bagged in heavy duty polythene bags and are heat sealed.
The Hand Crimper has been in production for over 25 years and is still considered the best machine on the market. The Crimper is very cheap compared to its pneumatic counterparts and is extremely user friendly with a quick change tooling system allowing the fabricator to swap tooling in a matter of minutes. The amazing flexibility of the machine allows most domestic and architectural systems to be accommodated also. Anvils and Punches can also be supplied to suit your requirements.
The Spacer Bar Saw allows fast and accurate cuts on most Aluminium Spacer and Georgian Bars. It's high speed air motor and sturdy aluminium structure gives long and trouble free life.
Various sizes of stainless steel Chevrons are available, usually from stock. However special or unique sizes can be manufactured on request.
Design and manufacture services for Jigs, Anvils, Anvil Blocks and Punches are available on request to facilitate the fabricator to ensure a fast and efficient manufacture and assembly of their windows.
The Sprue Guide, or Button Stick has a robust construction to allow fast and accurate removal of the welded sprue on PVCu welded profiles using the industry standard moon knife.